here is the info section of the dvd - please leave comments
Thursday, September 25, 2008
film 04
here is the interview section of the dvd -
please leave comments asap.. going to print dvd monday -
please leave comments asap.. going to print dvd monday -
Wednesday, September 3, 2008
Tuesday, August 19, 2008
Tuesday, July 22, 2008
Wednesday, July 16, 2008
Tuesday, July 15, 2008
ABOUT MOTORS
Hi so i had a look at the MAX msp script, turns out changing the speed changed the speed on all the motors on the side of 17th foot... With the new regulator so Voila, video proof>
I have also taken the liberty of making a something of a tutorial into controlling the motors using max msp. (theoretical) so that changes can be made by all of us...
Monday, July 14, 2008
Progress Update
Just a quick update, Jess, Cathy, James, Erik E and myself worked on the motor/bracing.
After alot of fiddling, all bracing has been placed on and motors needed a little be a manipulating to fit on.
The pieces have not been fixed just incase we need to change motors.
Motors 19, 20 have been mucking up and may need replacing.
The new regulator "pulsing" for some reason too.
After alot of fiddling, all bracing has been placed on and motors needed a little be a manipulating to fit on.
The pieces have not been fixed just incase we need to change motors.
Motors 19, 20 have been mucking up and may need replacing.
The new regulator "pulsing" for some reason too.
Monday, June 30, 2008
This little flower
UPDATE
Tuesday, June 24, 2008
16/6/08
Test conducted on this day was to increase the thickness of both the rack and pinion, to give a wider grip area between the two while giving it less chance to slide out of each other, even if the motor is not fully parallel to the rack. This was done by gluing two racks and 2 pinions together.
Test though, was unsuccessful due to what seemed like Phidget board problems. We believe this was due to the board being on all night, and will try again the next chance we get.
Test though, was unsuccessful due to what seemed like Phidget board problems. We believe this was due to the board being on all night, and will try again the next chance we get.
Wednesday, June 11, 2008
Yesterday
Hi guys,
I've collated the time lapse footage shot yesterday, so you can all relive the day that was..
Enjoy!
Sunday, June 8, 2008
Allright so
So what, the arches are filled the feet are ready the patches are half finished and joanne is coming tomorrow. I just woke up and i figured out that the solution is quite simple.
my diagrams are trying to show what i will attempt to formulate in words.
the load or weight is landing on the motors not allowing them to modify the positions of the arches. the motors where never meant to push against a force just slightly alter its position allowing for the snapping. the loads should really be passed down vertically and the motors only adjusting the positions. this can be easily archived by fixing the last triangle inward base somehow (easy to test with flat cardboard) - there might be the need to ad a kink into one triangle to allow the motor to adjust horizontal position.
See you tomorrow, in 8 hours. if you see this now give me a call and we can discuss... I'm super excited.
Saturday, June 7, 2008
Friday, June 6, 2008
Thursday, June 5, 2008
Subscribe to:
Posts (Atom)